Is there way to move RESET_ORG to other address, without moving interrupt vector?
DEFINE RESET_ORG 004h also move vectors. In .LST file interrupt vector are defined as RESET_ORG+8h or 18h.
DEFINE LOADER_USED 1 doesn't do anything. I'm looking in disassembled hex file...
This is test code:
Code:
    DEFINE NO_CLRWDT 1
    DEFINE LOADER_USED 1
    DEFINE INTHAND myint    ' Define interrupt handler
    DEFINE INTLHAND myint    ' Define interrupt handler

Start:
    PORTD.6=1
    PORTD.6=0
GOTO Start

@myint bcf PORTB,1
Name: disasm.png Views: 3169 Size: 12.2 KB

Also I noticed that with or without NO_CLRWDT 1, there is no CLRWDT in hex file.