Problem with DATA in PBP

[DynamoBen]

I'm not suggesting that the DATA statement won't work for that chip. I know DATA will work. However Screamer will not program the onboard eeprom (in my expirence). I'm currently working on a project with screamer and a 16F876A. When I program via the loader is doesn't reprogram my onboard EEProm values, I end up having to use a conventional programming method.

[Dave]

DynamoBen, I also have an set of Screamer radios that I've had for about 2 years and a while back saw some email somewhere about using it to bootload pic processors. I haven't used them for that purpose as of yet but I'm interested in what you find out as for using them to bootload code over the air to a pic controlled device. I have used them in the past for remote control of an lawnmower that I built. Please keep me informed....

Dave Purola,
N8NTA

[DynamoBen]

Screamer is not a hardware device it is half of a bootloader system.

See http://www.sparkfun.com/tutorial/Bloader/bloader.htm for more detail.

[Bruce]

Hi Dave,

I've used the 900MHz Screamer radios for wireless boot-loading. Pretty
handy for those hard to reach locations...

Here's how: http://www.rentron.com/PicBasic/wireless.htm