Pwm portb in pic 16f628 in same time

[dragan77]

Thks.so much!
yes, I need 8 Different PWM signals!!!
I looking this site,I found code for PWM,
but when I tried COMPILE,
I have so many errors,I dont now what is happed!!
Code is:

'****************************************************************
'*  Name    : Test_SPWM.pbp                                     *
'*  Author  : Darrel Taylor                                     *
'*  Date    : 9/30/2006                                         *
'*  Version : 1.0                                               *
'*  Notes   :                                                   *
'*          :                                                   *
'****************************************************************
; Initialize your hardware first

DEFINE OSC 20
CLEAR

INCLUDE "DT_INTS-14.bas"         ; Base Interrupt System
INCLUDE "SPWM_INT.bas"              ; Software PWM module

DEFINE SPWM_FREQ  40                ; SPWM Frequency
DEFINE SPWM_RES   256               ; SPWM Resolution

DutyVars   VAR BYTE[3]              ; DutyCycle Variables
  DutyVar1 VAR DutyVars[0]          ; group them in an array for easy access
  DutyVar2 VAR DutyVars[1]          ; with FOR loops etc.
  DutyVar3 VAR DutyVars[2]

ASM
SPWM_LIST  macro                    ; Define PIN's to use for SPWM
     SPWM_PIN  PORTB, 0, _DutyVar1
     SPWM_PIN  PORTB, 1, _DutyVar2
     SPWM_PIN  PORTB, 2, _DutyVar3
  endm
  SPWM_INIT  SPWM_LIST              ; Initialize the Pins
ENDASM

ASM
INT_LIST  macro    ; IntSource,        Label,  Type, ResetFlag?
        INT_Handler   TMR1_INT,  SPWMhandler,  ASM,  yes
    endm
    INT_CREATE                      ; Creates the interrupt processor
ENDASM

@ INT_ENABLE  TMR1_INT              ; enable Timer 1 interrupts

;_____________________________________________________________________________

RandVar   VAR WORD : RandVar = 12345
LoopCount VAR WORD

Main:                               ; Simple Demo to fade/flash some LED's
    DutyVar1 = 5                        ; Start with 3 LED's at different
    DutyVar2 = 50                       ; brightness
    DutyVar3 = 150
    pause 3000
     
    FOR LoopCount = 1 to 4              ; Reapeat 4 times
        for DutyVar1 = 0 to 150         ; Fade LED1 UP
            pause 10
            RANDOM  RandVar             
            DutyVar3 = RandVar & $3F          ; Give LED3 a random dutycycle
        next DutyVar1
         
        for DutyVar1 = 150 to 0 STEP -1 ; Fade LED1 Down
            pause 10
            RANDOM  RandVar
            DutyVar2 = RandVar & $3F         ; Give LED2 a random dutycycle
        next DutyVar1
    NEXT LoopCount     
GOTO Main

and to many errors

[dragan77]

And I tried,compile in PicBasic,this code:

define OSC 20

define SPWMFREQ  100           ' PWM frequency in Hz    

DutyCycle1   VAR  byte    ' 0-255  0=Idle Low   255=Idle High
DutyCycle2   VAR  byte 
DutyCycle3   VAR  byte    

SPWM1PIN  VAR PORTB.0          ' SPWM channel 1
define SPWM1VAR  _DutyCycle1

SPWM2PIN  VAR PORTB.1          ' SPWM channel 2
define SPWM2VAR  _DutyCycle2

SPWM3PIN  VAR PORTB.2          ' SPWM channel 3
define SPWM3VAR  _DutyCycle3
 
Include "Multi_SPWM.pbp"

DutyCycle1 = 0
DutyCycle2 = 127
DutyCycle3 = 255

Loop:
   Pause 100
Goto Loop

and I have errors:

ERROR: Variable wsave3 position request 416 beyond RAM_END 335.

Can anybody now what is problem!!!