Real time clock

[ScaleRobotics]

No, you don't need to remap the pins. It is a dual example. He show both " so I'm posting a simple example here showing how to use the RTCC, and how to assign PWM to several pins."

For you, you can just look at the RTC part.

From the data sheet under RTCC

• Requirements: external 32.768 kHz clock crystal

  ' Connect a 32.768 kHz watch crystal between pins 11 & 12 T1CKI & T1OSI
  ' with caps to match your crystal load capacitance.
  ' 11        12
  '  |---||---|
  '  |  xtal  |
  ' _|_      _|_
  ' ___      ___  2 x 12pF caps
  '  |        |
  ' gnd      gnd