18F2450 internal osc

Closed Thread
Results 1 to 4 of 4

Hybrid View

  1. - 7th February 2011, 06:33 #1
    FinchPJ's Avatar
    FinchPJ
    FinchPJ is offline Junior Member
    Join Date
    Jun 2005
    Location
    Surrey, England
    Posts
    35

    Did you find this post helpful? Yes | No

    Default Re: 18F2450 internal osc

    Two thoughts:
    1) I have found fuses are set by the loader fuse configuration, so no effect of changing them later
    2) OSCCON = 00000010 is not the same as OSCCON = %00000010, rather = %00001010 ie. decimal 10
    Peter
    PS TRISB assignment is 7 bit was that intentional?
    Last edited by FinchPJ; - 7th February 2011 at 06:38.
  2. - 7th February 2011, 14:32 #2
    kduck63's Avatar
    kduck63
    kduck63 is offline Junior Member
    Join Date
    Jun 2009
    Posts
    20

    Did you find this post helpful? Yes | No

    Default Re: 18F2450 internal osc

    Thanks for the suggestions.

    I cleaned up the sloppy parts of the code and worked with the config fuses a bit, but i still had no luck. i finally gave in and added a external oscillator; i will revisit this when i have more time.
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules