Bootloader and configs, EEprom

Results 1 to 21 of 21

Threaded View

  1. - 30th January 2011, 22:20 #7
    ScaleRobotics's Avatar
    ScaleRobotics
    ScaleRobotics is offline Prolific Poster
    Join Date
    Feb 2006
    Location
    Gilroy, CA
    Posts
    1,530

    Did you find this post helpful? Yes | No

    Default

    You can see which configs are set in the Hex by loading the hex file into your programmer. Then look at the config settings and see what they are.

    On a Melabs programmer and a Pickit2 programmer:

    Name: configs.PNG Views: 2024 Size: 88.5 KB

    Now if you mean the speed of the Osc, then you can modify it using this procedure:

    http://www.picbasic.co.uk/forum/cont...Bootloader-Hex
    Last edited by ScaleRobotics; - 30th January 2011 at 22:23.
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules