16F1827 voltage issue

Closed Thread
Results 1 to 8 of 8

Hybrid View

  1. - 28th January 2011, 05:05 #1
    Macgman2000's Avatar
    Macgman2000
    Macgman2000 is offline Member
    Join Date
    May 2008
    Posts
    169

    Did you find this post helpful? Yes | No

    Default

    I have 6 LEDs. The LEDS represent 2 H-bridges with 2 direction controls and 1 PWM per bridge. The resistors were 70 ohms, I changed all resistors to 220. It still did the same reset condition. I reprogrammed the board a few times changing nothing but fuse settings and It seems to work now. I have no idea why....I just flipped them one way and then the other and downloaded it.

    Nick
  2. - 28th January 2011, 12:42 #2
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,648

    Did you find this post helpful? Yes | No

    Default

    An eye to the default value of the LVP bit ???

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules