Getting Parallax PLX-DAQ to work with HSEROUT

[ScaleRobotics]

Hi Don,

I have not tried using that, but others have been successful. Here is one thread that talks a little about it.

http://www.picbasic.co.uk/forum/showthread.php?t=13564

[dbachman]

Hi Don,

I have not tried using that, but others have been successful. Here is one thread that talks a little about it.

http://www.picbasic.co.uk/forum/showthread.php?t=13564

Yea I tried that but couldn't get it to work.

Thanks

[ScaleRobotics]

Yea I tried that but couldn't get it to work.

Hey Don,

What stage of not working is it at? Do you have some code?

Have you tested your hserout, to be sure you have the right baud rate, etc?

[dbachman]

Hey Don,

What stage of not working is it at? Do you have some code?

Have you tested your hserout, to be sure you have the right baud rate, etc?

There really is no code just the defines and HSEROUT. Bare minimum. It connects and I can see the little green box with the "R" in it flash red when I reset the pic. I can receive no problem with hyperterminal and the terminal in Microcode Studio. I have used Debug and Hserout2 with those two with no problems. I think it might be a format issue.