Stable ADC readings

[mazoul72]

I think it is more reliable to use Kline to access to all functions (i am going to try to use these adresses Kline functions)
i have a code but i have to work on it (Kline access based) .i will give a part of it in a new post to hope that someone can help us about it .
Because my FIS display base code is the same than Golfop...(take on a yahoo group FREELY and freely redistriable but now it is too expensive to buy it---lot of work on it) .
For try it , we have to use a little program to send caracters between DB25// and K-line .(see logs) LOGS.zip

[mazoul72]

EDIT :

See logs for what reacts FIS with sent caracters ... Attachment 6112

LineK schematics , but we need a program to send values to see how reacts car radio LineK wire ...

code :

data(data line),clk(clock)
suma=0
dat=126
Shiftout data, clk, 5,[dat]
suma=suma ^ dat

Rem High data

dat=237
Shiftout dato, clk, 5,[dat]
suma=suma ^ dat

Rem Low data

dat=15
Shiftout dato, clk, 5,[dat]
suma=suma ^ dat

Rem High data
It is for DATA Line send (ENA/CLOCK/DATA)

For cont=0 To 15
tmp=msg[cont]
Rem dat=255 - tmp
dat= ~ tmp
suma=suma ^ dat
Shiftout data, clk, 5,[dat]
Rem Low data
Next cont

'Somme de controle (sum)

dat=suma + 1
Shiftout data, clk, 5,[dat]
Rem Low data
High ena
posy=255
GoSub display


FisDw:
Low ena
suma=0
dat=169
Shiftout data, clk, 5,[dat]
sum=sum ^ dat

know 255-longitude del msg

dat=241
Shiftout data, clk, 5,[dat]
sum=sum ^ dat

It is for example ,but it is a little part of sent values .

Thanks in advance to ameliorate or given answers .