Stable ADC readings

[mazoul72]

i 've just try compiler 2.60 plus patch 2.60c under microcode studio 3.0.0.5
and verify fuse under willem (hs) , always the same .
arg , no understand why if the code is good .........................../

[mazoul72]

STUPID I AM , no pull-up resistors for RA2 and RA3....

[Ioannis]

Post #52

Ioannis

[mister_e]

----======----



----======----

[mazoul72]

Hello,

i tried with my car radio , it works well but a little slow for buttons reaction .
Perhaps the pause ...
I will try to integrate interrupts with it.
many thanks Steeve.

regards
Hervé

[mister_e]

Good news! The code itself should be fast enough, I guess the radio need some time to process it, and sure enough, it's not on his high priority task.

Post your code here, I'll check if I see something weird.

PS: when you post a code here use the code tags, this way it appear in a code box, and we don't miss the outdent format. It is really simple to do.
[code]
paste your code here
[/code]

[mazoul72]

Steeve ,

do you know where is the values for other functions like up/down/valid (press 2 or 3 seconds on function button) / EQ/Display ?
I have all general functions under 100kohms .
it is for DEH-6900IP Pioneer .

Thanks.