Need help using MEL command "Xout" with an X-10 PCS-05 bidir pwr-line interface

Closed Thread
Results 1 to 20 of 20

Hybrid View

  1. - 20th January 2011, 14:39 #1
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    I was thinking more on the line that you probably have your PBP manual at hand. I believe its Xin and Xout show what is needed to interface.
    In this case the online version is the same as the book.
    http://melabs.com/resources/pbpmanual/
    Dave
    Always wear safety glasses while programming.
  2. - 20th January 2011, 15:23 #2
    dhouston's Avatar
    dhouston
    dhouston is offline Prolific Poster
    Join Date
    Dec 2005
    Posts
    1,073

    Did you find this post helpful? Yes | No

    Default

    Per the PBP online manual...
    Output from the X-10 interface (zero crossing and receive data) are open-collector and require a pull up resistor of around 4.7K to 5 volts.
    That's all that is necessary.
    www.davehouston.net
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules