P16F1827 and LCD Problems

[Bobw55]

I am not sure which program you are referring to?
The one That gave me the display was written by me on a PIC16F88 using C.
I gave up on the 16F1827 do to lack of programming knowledge and lack of sample programs for that chip. Now that I have a somewhat grasp on the basics, I have been able to read and display the ADC value of a pot, (will use that later to read 3 switches on one pin).
It is all the PIC dependent declarations at the very beginning of the program that trip me up.

Bob

You have to crawl before you walk, and I am starting to crawl pretty well.

[Acetronics2]

I am not sure which program you are referring to?

Without any further notice we all were on posts #1 and #3 ...

The one That gave me the display was written by me on a PIC16F88 using C.

Of course result was not exactly that expected with #3 program ...

I gave up on the 16F1827 do to lack of programming knowledge and lack of sample programs for that chip. Now that I have a somewhat grasp on the basics, I have been able to read and display the ADC value of a pot, (will use that later to read 3 switches on one pin).
It is all the PIC dependent declarations at the very beginning of the program that trip me up.

So, comes the killing question ...

Did you notice we're aboard a PICBASIC PRO ( MeLabs brew ) forum, and we are supposed to "speak" Basic ???

me too ...

Alain

[Bobw55]

Yes I do know this is a BASIC forum.
My post was only to thank those who were trying to help me get started.

Bob