P16F1827 and LCD Problems

Results 1 to 29 of 29

Threaded View

  1. - 30th January 2011, 18:10 #16
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Default

    Now, this is not a fair comparison, because I don't know what MicroC's program is doing
    Hoooooo ...

    See #4

    Program just reads voltage on ADC channel 2 , prints a text on line one of the LCD and prints the ADC voltage in V.VVV format on the second line ... of course with the Unit !

    Comparison is not unfair at all as the shortest MkC Pro available way to display numbers is used here ...
    you had also noted the LONG type use for "calculations" ... unavoidable with MkC.

    I already made a comparison on this Forum and result was similar ...
    PBP and Proton were quite the same for the result.

    Alain
    Last edited by Acetronics2; - 30th January 2011 at 18:15.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
« Previous Thread | Next Thread »

Members who have read this thread : 1

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules