No, you will not be able to compile that program with MPLAB, only with MicroC.
|
No, you will not be able to compile that program with MPLAB, only with MicroC.
Thanks and Regards;
Gadelhas
|
Yuppers... just found that out the hard way. About ready to put 1KV thru this PIC and say the hell with it..... NOT
|
Don't do that give it to me!!!
Thanks and Regards;
Gadelhas
|
I'll figure something out.
I should have known the simple would be hard
|
Tried another sample file with MPLAB and actually managed to get it to build and load. But "NO" LCD initialization, still a top row boxes.
Will have to Google the 16f1827 some more and see if someone has Ideas.
|
Do you have pin 3 of the LCD (contrast) connected to a POT?
Dave
Always wear safety glasses while programming.
|
YES I do.... Should have mentioned that earlier on.
Actually used a little interface board from here :http://www.mikroe.com/eng/products/v...adapter-board/ pre-wired for 4 bit mode
Members who have read this thread : 1You do not have permission to view the list of names.
Posting Permissions
Bookmarks