More wood chuck lighting questions

[AvionicsMaster1]

In an effort to finally complete a project, here is the final schematic and diagram for a shadow box I made for one of my co-workers. There may be a few final tweaks once he sees what's available but with cut and past I can make it work.

The schematic is from Darrel Taylor and the same as previously but I've added it again for clarification. Although his LED numbers may not match my LED numbers exactly you get the point on how it's wired. Others on this forum may recognize parts of my program as e-mails texts or chats and for those I'm extremely greatful.

With the help of the NAP 4 line the PIC draws <5nA most of the time and draws only about 250nA when it does wake up for a few mSec. This should extend battery life considerably so I've taken out the relay, voltage regulator and their associated headaches.

I post this mainly for review to see where I could have saved a keystroke here or repetitition there. If you've got some constructive comments please add them. Thanks.

[Heckler]

Is it just me?? or is your .doc file corrupted??

I can open the .pdf but not the .doc file.
I could open the .doc file from your earlier post but not your last post.

Thanks
dwight

[SteveB]

Any chance to see a picture of the final project?

[AvionicsMaster1]

Looks like doc file is messed up. I don't have file at home so will post it when I get to work.

Sorry, there are some personal items in the shadow box I don't want pictures of circulating on the internets (Al Gore's word).

[AvionicsMaster1]

This is it. Enjoy. Sorry about formatting. Long story.

'************************************************* ***************
'* Name : Randomize 20 LEDs.BAS *
'* Author : Greg Browne *
'* Notice : Copyright (c) 2011 Not a chance *
'* : All Rights Reserved *
'* Date : 08/30/2011 *
'* Version : 1.0 *
'* Notes : 12f683 w/ nap to conserve power and various *
'* : lighting sequences *
'************************************************* ***************
' needs to be streamlined for cleaner reading
clear
define osc 4

' ------------------------------------turn off some stuff to save a little power
@ device mclr_off 'start button is connected here
@ device bod_off
@ device fcmen_off
@ device ieso_off
@ device intrc_osc_noclkout
@ device pwrt_on
@ device protect_off

ansel = 0
cmcon0 = 7
adcon0 = 0

' --------------------------------------------------------------- some variables
delay2 var word
myword var word

delay var byte
mybyte var byte
previous_random var byte
gpiostate var byte
tristate var byte
i var byte
j var byte
k var byte
l var byte

' ------------------------------------------------------------------ some values
delay = 50
delay2 = 500

'------------------------------------------------------------finally the program
starthere:
if gpio.3 = 1 then goto main
nap 4 'naps for 288 milliseconds

goto starthere

'--------------------------------------------flash them all to make it look cool
main:
for i = 1 to 20
random myword
mybyte = (myword//20)
if previous_random = mybyte then goto main
gosub high_led
pause delay
gpio = %000000
pause delay
previous_random = mybyte
next i
'---------------------------------------------------------------- first 13 boxes
mybyte = 0' start LEDs in sequence
for mybyte = 0 to 12
gosub high_led
pause delay2*2
gpio=%000000
pause delay
next mybyte

'---------------------------------------------------------- four stars real fast
mybyte = 13' beginning of stars
for j = 1 to 4
for mybyte = 13 to 16
gosub high_led
pause delay2/5
gpio=%000000
pause delay
next mybyte
next j
'---------------------------------------- four stars with another blinking twice
mybyte = 13' beginning of stars
for mybyte = 13 to 17 ' with the HUD glass this time
gosub high_led
pause delay2
gpio=%000000
pause delay
next mybyte
' ---------------------------------------blinks these lights k number of times
mybyte = 17
for k= 1 to 3
gosub high_led
pause 500
gpio = 0
pause 100
next k
'-----------------------------------now for the flag and name//take this out ???
' mybyte = 18' show them off a little
'for mybyte = 18 to 19
' gosub high_led
' pause delay2
' gpio=%000000
' pause delay
'next mybyte
'----------------------------------------light american flag first then name tag

trisio = %001111
gpio = 0
for l = 0 to 255 step 5' led18 gpio.4
pwm gpio.4,l,10' light number 18, l intensity step, 10 usec
next l

for l = 255 to 0 step -5
pwm gpio.4,l,10
next l

trisio = %001111

for l = 0 to 255 step 5 'led 19 is gpio.5
pwm gpio.5,l,10' light number 19, l intensity step, 10 usec
next l

for l = 255 to 0 step -5
pwm gpio.5,l,10
next l

'----------------------------------------------------------------turn it all off
gpio = 0
trisio = %111111
' -----------------------------------------------------------send it back to nap
goto starthere

high_led:
lookup mybyte,[%000001,%000010,%000001,%000100,%000001,%010000,%0 00001,%100000,%000010,%000100,%000010,%010000,%000 010,%100000,%000100,%010000,%000100,%100000,%01000 0,%100000],gpiostate
gpio = gpiostate
lookup mybyte,[%111100,%111100,%111010,%111010,%101110,%101110,%0 11110,%011110,%111001,%111001,%101101,%101101,%011 101,%011101,%101011,%101011,%011011,%011011,%00111 1,%001111],tristate
trisio = tristate
return

end

[Heckler]

Like SteveB said...
"any chance of seeing a photo of your project??" or even a drawing of the LED layout or just describe it...

Thanks for the code... but it would be nice to see how you arranged the LED's.
Specifically how each LED is laid out. You could possibly number the led's in the schematic and then show how they should be arranged.

Thanks

PS... the next time you post code use the "#" button at up on the message tool bar and it will put your code in a scrolling window.

[AvionicsMaster1]

Attached is the shematic, outline drawing and code for the plaque.

It was an interesting project to control that many LEDs (20) with only 5 pins.

If there is any further clarification needed or more info desired please ask.

[Demon]

Moved from Schematics.

Robert