Displaying Videos and Images on 4Dsystems uOLED Serially

[astanapane]

i've been trying to use the interrupt commands but i get a lot of errors. I used both files

INCLUDE "DT_INTS-14.bas" ' Base Interrupt System
INCLUDE "ReEnterPBP.bas" ' Include if using PBP interrupts

First error i get is that micro assembler does not support 16F628a, and it is asking to use the MPASM for compiling.

then if i use the MPASM i get again a lot of error like the attached pic.

i dont understand why it says that cannot filnd the pic16f628a.

here is also my code

'****************************************************************
'*  Name    : TAG NUMBER.BAS                                    *
'*  Author  : LEONARDO BILALIS                                  *
'*  Notice  : Copyright (c) 2011 [LEONARDOS BILALIS]            *
'*          : All Rights Reserved                               *
'*  Date    : 11/6/2011                                          *
'*  Version : 1.0                                               *
'*  Notes   : this program allows you to see the                *
'*          : Number of the RFID tag                            * 
'*          :                                                   *
'****************************************************************
@ DEVICE PIC16F628a      
Include "MODEDEFS.BAS"
INCLUDE "DT_INTS-14.bas"     ' Base Interrupt System
INCLUDE "ReEnterPBP.bas"     ' Include if using PBP interrupts
CMCON = 7
;-----------------------------------------------------------------
LED   VAR  PORTB.3
  
ASM
INT_LIST  macro    ; IntSource,        Label,  Type, ResetFlag?
        INT_Handler   TMR1_INT,  _ToggleLED1,   PBP,  yes
    endm
    INT_CREATE               ; Creates the interrupt processor
ENDASM

T1CON = $31                ; Prescaler = 8, TMR1ON
@ INT_ENABLE  TMR1_INT     ; enable Timer 1 interrupts
;-----------------------------------------------------------------

DEFINE OSC 8	'Set oscillator in MHz 
DEFINE LCD_DREG PORTB  'define port to LCD
DEFINE LCD_DBIT 4      'RB4 RB5 RB6 RB7 to D4 D5 D6 D7 display
DEFINE LCD_RSREG PORTA 'RS on porta
DEFINE LCD_RSBIT 0     'RS on porta.0
DEFINE LCD_EREG PORTA  'Enable on porta
DEFINE LCD_EBIT 1      'Enable  porta.1
DEFINE LCD_BITS 4      ' 
DEFINE LCD_LINES 2     'lines 2
PAUSE 200             ' Stop 200ms
;----------------------------------
LCDOUT $FE,1           ' power lcd
Lcdout $FE,1,4
lcdout $FE, 1," Copyright 2011"
lcdout $FE, $C0,"Leonardo Bilalis"
;----------------------------------

pause 1000
low led
pause 500
high led
pause 500
low led
pause 500
high led
pause 500

' -----[ Variables ]-------------------------------------------------------

buf	    VAR	byte [10]' RFID bytes buffer
tagNum	VAR	Byte	 ' from EEPROM table
idx	    VAR	Byte	 ' tag byte index
char	VAR	Byte	 ' character from table

Main:
pause 500
lcdout $FE,1," Please use your"
lcdout $FE, $C0,"Personal RFIDTAG"
pause 500
SERIN2 portb.1, 84, [WAIT($02),Str buf\10]
pause 1000
LCDout $fe,1, "TAG ID:"
lcdout $fe,$C0, "NO: ", str buf\10
pause 5000
goto main

'---[TMR1 - interrupt handler]--------------------------------------------------
ToggleLED1:
TOGGLE LED
@ INT_RETURN

if you have any suggestion please let me know.

thanks a lot for your help.