FineLineIDE

[Normnet]

Norm,
I checked for the file name that is mentioned with an .ERR extension and it is located in the same folder as where the .pbp file is that I attempted to compile.
Regards, John Ellis
Attachment 6380

Do a check to be sure the path in the "Did not find file" message is exactly the same as the file path in the same folder as where the .pbp file is.
Paste the path on the forum including the file name.
Possibly even upper/lower case could produce an error.

Norm

[Demon]

Sorry if I missed this:

How does FL compare with MCSP in terms of generated code?

I assume there's more than one way to skin a cat when compiling.

Robert

[Normnet]

Sorry if I missed this:

How does FL compare with MCSP in terms of generated code?

I assume there's more than one way to skin a cat when compiling.

Robert

FL is an IDE (Integrated Development Environment).
It's somewhat like word is compared to notepad only its for programming.
The same compiler is used with FL as is with Microcode Studio.

I developed FL because I wanted additional features such as If-Endif code bracketing, color background, and presently undergoing testing is code folding and auto-indent.
Soon you may never indent another line and keep only the current active areas of code unfolded for a compact display of your code.

Norm

[Demon]

FL is an IDE (Integrated Development Environment).
It's somewhat like word is compared to notepad only its for programming.

Just one more thing I just keep forgetting all the time.

...
I developed FL because I wanted additional features such as If-Endif code bracketing, color background, and presently undergoing testing is code folding and auto-indent.
...

I like formatted code too. Looking forward to trying this out, most likely when I upgrade to PBP 3.0.

Robert

[mackrackit]

I like formatted code too. Looking forward to trying this out, most likely when I upgrade to PBP 3.0.

Do not wait, you are missing out on a really nice editor.

[jellis00]

Upon more digging and testing, it appears this problem may have been caused by the fact that my PBP3 install was not "activated" yet. I hopefully will get activation key Monday and will see if this solves the problem. Till then?

[Normnet]

Upon more digging and testing, it appears this problem may have been caused by the fact that my PBP3 install was not "activated" yet. I hopefully will get activation key Monday and will see if this solves the problem. Till then?

Did activation solve the problem?
If so I will "You may require activation of PicBasicPro" to the error message.

Norm

[jellis00]

Did activation solve the problem?
If so I will "You may require activation of PicBasicPro" to the error message.

Norm

Before I activated I did some other things. Now that it is activated it works, but not sure whether that was the single act that let things work.

[c_moore]

Hello Everyone,

I am trying out FL IDE and get the same thing as in this FL1_6_0_0.pdf. The Code compiles fine inn the MCSEX IDE.

[Normnet]

Hello Everyone,

I am trying out FL IDE and get the same thing as in this FL1_6_0_0.pdf. The Code compiles fine inn the MCSEX IDE.

Locate the error file and check the error message file path exactly against the actual file path for any differances.
Post the file path.

Norm