Having trouble with SERIN command and MAX6675

Results 1 to 40 of 40

Threaded View

  1. - 10th December 2010, 20:14 #21
    emerson's Avatar
    emerson
    emerson is offline Junior Member
    Join Date
    Dec 2010
    Posts
    48

    Did you find this post helpful? Yes | No

    Default

    i found in this post (http://www.picbasic.co.uk/forum/show...1178#post71178) that you stated you need a temperature
    reference for every time the wire material from the thermocouple changes.

    Anyplace the wire material changes you need a reference temperature and calcs. A couple exceptions here and there though.
    I had copper wire soldered to the terminals on my thermocouple. I disconnected the copper wires but it didn't help
    Last edited by emerson; - 10th December 2010 at 20:47.
« Previous Thread | Next Thread »

Members who have read this thread : 2

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules