I was just struggling with a menu system and how to define the multiple arrays.

My application is to have a remote PIC connected over a SPI link and the master then sends the config and text for the menu to the display/switches pic on startup. This means a generic display PIC and any changes needed can be done with a simple firmware update to the master processor using a bootloader.

Its a bit simpler due to using 4 x 7seg LEDs for the menu system, but the needs of multiple options still exists.

Also like the cool LCD image generation tool. On the same website there are some 7 seg LED display graphics that are going to come in mighty handy for mocking up my menu system !

Have a good Holiday season !

bill.