Hi,
You need an " expert programmer " ( sic ) to run a couple of blinking lights ???
you'd much better post your SOURCE program here and explain what you intend to do ...
Alain
Hi,
You need an " expert programmer " ( sic ) to run a couple of blinking lights ???
you'd much better post your SOURCE program here and explain what you intend to do ...
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
Good joke AcetronicsSee that is exactly what i'm traying to avoid...
![]()
I need to make migration of code from pic 12f629 to 16f876....
just piece of code...to get the picture...
.....
asm
bsf STATUS,RP0 ;' bank 1
call 3ffH
movwf OSCCAL ;' calibrate
bcf STATUS,RP0 ;' bank 0
endasm
.....
and stuff like that...
If somebody is willing to help me send me message and i will explain...
Can i contact you in personal message and explain it to you,send source and all?
Thank Again folks...
Hi,
Do not tell me you ask for ASSEMBLER mods ... aboard a PICBASIC PRO forum
Especially when PBP shows commands to do that ...![]()
Those processors have SIGNIFICANT differences, so, I doubt just changing few lines could make it ...
Once more : POST your Code; no secrets here ... 1K words is a soooo little piece of cake.
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
Haha, Acetronics you really know how to made me laugh...what can i tell the project was developed in pic basicYes i know that this processors have significant differences, i'm not woried abouth 12 or 16 bit word lenghts i'm worried about internal oscilator differences, timers and stopping interupts....
Once again i will write you personal message if i may so...![]()
what's so secret about the code.
Twice Alain has asked (twice) for you to post up the code you have for the 12F chip and then no doubt all those expert programmers we have on this board will jump in and suggest how to make the changes to port it to the 16F chip.
I am sure now these flashing lights are for the Nuclear Missile it is going to hit Iran in the next US war.
So thats why is so secret.
And Alain is a spy here
Thats why he is going to get the PM! Now all that is for front cover!
Bond, James Bond
Hi, Ioannis
the secret gadget is an Ir Key reader.
I already saw such gadgets from Poland or Eastern Europe, to replace some defective old Renault Ir Key receivers ... ( placed close to the mirror, under the roof )
lots on the web for 20-30 US $ ... ready to use.
Nothing so terrible ...
Alain
Last edited by Acetronics2; - 8th December 2010 at 11:44.
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
Bookmarks