Can I use port a 0-1 as analog inputs and the rest as digital output on the PIC16F62x? and how do I do it?
Analog 627
Can I use port a 0-1 as analog inputs and the rest as digital output on the PIC16F62x? and how do I do it?
You can't teach an old dog new tricks, but I'm always willing to try.
|
Had to reply just cuz I like your avaitar! But Also, You realize you don't have Analog Inputs so to speak, you have analog comparators. At least thats how I read the datasheet.
As far as your original queston goes, I think yes, just set CMCON for the AN inputs you want, and then TRISA for outputs where you want
-Bert
The glass is not half full or half empty, Its twice as big as needed for the job!
http://foamcasualty.com/ - Warbird R/C scratch building with foam!
|
Hi, Chris
you even can use a digital input as an analog one ....
with the RCTime function ...
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
|
AD conversion
And I like yours, cncmachineguy no it is both I always use porta for AD conversion but I never tried it with only 2 ports as AD and the rest output see the lower down in the data sheet.Originally Posted by cncmachineguy
You can't teach an old dog new tricks, but I'm always willing to try.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks