Pickit3 from Microcode Studio

Closed Thread
Results 1 to 18 of 18

Hybrid View

  1. - 5th December 2010, 16:37 #1
    Plcguy's Avatar
    Plcguy
    Plcguy is offline Junior Member
    Join Date
    Oct 2010
    Posts
    27

    Did you find this post helpful? Yes | No

    Default

    Now that I see Melanie's write up I get it.
    I'm surprised I didn't find this in a search? I looked in FAQ, but that is for the forum only.

    Thank you for the pointing.

    So, I'm assuming PM has "features" MPASM doesn't?
  2. - 5th December 2010, 16:46 #2
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    The write up from Mel is in the FAQ forum.
    You have it backwards, MPASM has more than PM.
    Dave
    Always wear safety glasses while programming.
  3. - 5th December 2010, 18:25 #3
    ScaleRobotics's Avatar
    ScaleRobotics
    ScaleRobotics is offline Prolific Poster
    Join Date
    Feb 2006
    Location
    Gilroy, CA
    Posts
    1,530

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by mackrackit View Post
    The write up from Mel is in the FAQ forum.
    Well, technically it is in the "How To" section. http://www.picbasic.co.uk/forum/content.php?r=57 Maybe I will try moving some things to the FAQ to try to make things a little easier to find.
    http://www.scalerobotics.com
  4. - 5th December 2010, 18:44 #4
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    http://www.picbasic.co.uk/forum/showthread.php?t=543
    The origional
    Dave
    Always wear safety glasses while programming.
  5. - 11th December 2010, 22:14 #5
    Ioannis's Avatar
    Ioannis
    Ioannis is offline SuperMod
    Join Date
    Nov 2003
    Location
    Greece
    Posts
    4,170

    Did you find this post helpful? Yes | No

    Default

    The instruction to add Pickit3 to MCS are very nice. The only minus I see is that this proceedure is much slower that using Pickit3 within MPLAB. I don't know why but took almost 3x times to program a F877 directly from MCS.

    Ioannis
    www.signalcom.gr
  6. - 11th December 2010, 22:55 #6
    Plcguy's Avatar
    Plcguy
    Plcguy is offline Junior Member
    Join Date
    Oct 2010
    Posts
    27

    Did you find this post helpful? Yes | No

    Default

    It seemed about the same for me
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules