Pickit3 from Microcode Studio

[mackrackit]

Might be best to stay with a 2. But I do not have a 3 so maybe it is OK. You never know.
http://www.picbasic.co.uk/forum/show...hlight=pickit3

[HenrikOlsson]

I've never had a PK2 so I can't really compare the two. I do have a PK3 and have it working from within MCS. I'm pretty sure I found the description on how to get it going here on the forum.

Anyway, the PK3Cmd.exe is the executable that you need to point MCS to and here are the parameters I use:
-P$target-device$ -F$hex-filename$ -E -M -B -L -V5
Apparenently the -V5 at the end specifies the voltage that the PK3 supplies to the target. Be careful with that if the target device is a 3.3V device. You have to use a fairly up to date MPLAB in order for it to work. Personally I'm on v8.50

/Henrik.

[Plcguy]

I've never had a PK2 so I can't really compare the two. I do have a PK3 and have it working from within MCS. I'm pretty sure I found the description on how to get it going here on the forum.

Anyway, the PK3Cmd.exe is the executable that you need to point MCS to and here are the parameters I use:
-P$target-device$ -F$hex-filename$ -E -M -B -L -V5
Apparenently the -V5 at the end specifies the voltage that the PK3 supplies to the target. Be careful with that if the target device is a 3.3V device. You have to use a fairly up to date MPLAB in order for it to work. Personally I'm on v8.50

/Henrik.

I saw the posts about loading 8.5 and using PK3Cmd.exe. I don't see Pickit3 as a drop down option in MCS though.

[HenrikOlsson]

Hi,
You have to add it manually. Click Add new programmer and select Create Custom Programmer Entry and follow the prompts.

[Plcguy]

OK, I installed the PK3Cmd.exe and added
-P$target-device$ -F$hex-filename$ -E -M -B -L -V5

seem to take it. So this works as easily as my epic?
I can still choose an pickit2 if this has issues. are you happy with the way yours gets called and run?

[HenrikOlsson]

I've had no problems with it. The only other programmer I have is a 15 years old PICStart+ so I can't say how the PK3 compares to anything really - but it works. When developing I tend to use a bootloader though so the PK3 doesn't get used that much.

One thing I've read about the PK2 is that Microchip won't add support for new chiås as they come out but recently I read somewhere that you could download new definitition files for it so.... Also there supposed to be some sort of basic logic/protocol analyzer application for use with the PK2 which I don't think is available for the PK3.

So again, the PK3 works fine for me, YMMV.

[Plcguy]

OK, borrowed a clone pickit3 from a guy at work.
set it up as we discussed - that went fine!

So, NOW I discover how thick I really am!
Since I'm not using epic, I need to define the pic and settings in the file. I get compile errors when I use
@ DEVICE PIC16F88 __config _CONFIG1, _INTRC_IO
I want to use the internal oscillator.

and error 207 "found label after column error and
err 122 "illegal opcode"

I've searched for quite a while AND tried a variety of syntax AND looked in the 16f88 inc file and know I'm missing something but....

So, syntax wise I need to tell MPASM
1. the processor
2. the fuse options

everyone else just posts
@ __config _CONFIG1, _INTRC_OSC_NOCLKOUT & _WDT_ON & _MCLRE_OFF & _LVP_OFF & _CP_OFF

or some applicable derivative of this and it works, but makes me wonder how MPASM knows the processor.

So I add
INCLUDE "p16f88.inc"
and it says "unable to open include file"

What am I missing?