|
yepok put this at ten and it now compile error free. Thanks for the cue
But with ten elements:
Voltage_Charge_time_RTCSec var byte[10]
does that mean I can have only ten values? like:
Voltage_Charge_time_RTCSec var byte[0]
Voltage_Charge_time_RTCSec var byte[1].....
......
Voltage_Charge_time_RTCSec var byte[9]
Voltage_Charge_time_RTCSec var byte[10] ?????
Ken
|
yes thats what it means, except it will go from 0 - 9, not 0 - 10. 0 - 10 is 11 elements. What are you trying to save here? sec and min should never need to be over 60 hours would never need to exceed 12 or 24 days would never need to be more than 31 add months for up to 12. but I may very well be thinking a whole different thing.Originally Posted by lerameur
yep
But with ten elements:
Voltage_Charge_time_RTCSec var byte[10]
does that mean I can have only ten values? like:
Voltage_Charge_time_RTCSec var byte[0]
Voltage_Charge_time_RTCSec var byte[1].....
......
Voltage_Charge_time_RTCSec var byte[9]
Voltage_Charge_time_RTCSec var byte[10] ?????
Ken
-Bert
The glass is not half full or half empty, Its twice as big as needed for the job!
http://foamcasualty.com/ - Warbird R/C scratch building with foam!
|
Humm yes I understand what you mean.
Here is what i am attempting to do, for sure there is anothr way to do it much better then the one I am thinking. My battery will be charging and discharging automatically for an indefinit period of time. Lets say the longest would a month !! So there could be lets say 5 charge /discharge cycle a day..so 150 total. SO for the seconds I would have something like that:
Voltage_Charge_time_RTCSec var byte[0] = First charge cycle time (ie. 02 seconds)
Voltage_Charge_time_RTCSec var byte[1] = Second charge cycle time (ie. 42 seconds)
etc...
How can I keep the time for 150 cycles ?
K
Last edited by lerameur; - 25th November 2010 at 15:53.
|
Write to the EEPROM?How can I keep the time for 150 cycles ?
Dave
Always wear safety glasses while programming.
|
Guess thats a good idea. I will go ahead and read up on EEPROM in the F88.pdf meanwhhile if you have a tutorial of something interesting to read on programming to the EEPROM with pic basic, that will be very appreciate . I never programmed to the EEPROM before !!
k
|
Hi I can find a lot of stuff with external EEPROM, if I need to program the internal EEPROM, do I need to use wires to itself ? I have not seen any examples either !! so far
K
|
http://melabs.com/resources/samples/pbp/eeword.htm
And the manual are two good places to start.
Work those examples and let us know how it goes.
Dave
Always wear safety glasses while programming.
Members who have read this thread : 1You do not have permission to view the list of names.
Posting Permissions
Bookmarks