I have an 18F27J53 with 48MHz crystal, HSPLL Div by 12 PLL. The PIC runs other functions as normal. The D+ and D- lines both have short pulses on so the hardware looks good. Tried pulling up D+ and D- (for low and high speed).

Tried many other clock/divider combinations, this approach at least gets on the System Devices list.

18F27J53 is not in the EasyHID Wizard, so I ran it for an 18F4550 and copied the USB line from the .BAS. None of the examples I can find use the newer J devices.

Windows finds the client, but it doesn't like it and lists it as 'Unknown Device'.

Any help or examples appreciated.