When going to a PC, the serial signal needs to leave the hardware inverted(PIC and components). Does not matter if you are going to a regular serial port or using a USB to serial converter.
The PIC, if using the hardware ports "HSEROUT" sends a TRUE signal so the MAX is needed for the inversion.
If bit-banging, "SEROUT2", then you can invert in PIC software.
Dave
Always wear safety glasses while programming.
Thanks guys
I think I have enough to get in trouble with now. I am off to put my test circuit together and start talking (or not).
-Bert
The glass is not half full or half empty, Its twice as big as needed for the job!
http://foamcasualty.com/ - Warbird R/C scratch building with foam!
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks