if ... then loop

[mackrackit]

From PM.txt

235 Opcode Expected Instead of 'Token'
Any text starting in column 2 or later which is not a commented is assumed
to either be an opcode, a pseudo-op or the name of a defined macro. All
other tokens will generate this error.

Can we see your code?

[lerameur]

its copied right off the net:

Include "modedefs.bas" ' Include serial modes

SO con 0 ' Define serial output pin
B0 Var byte
B1 Var byte

mainloop:
For B0 = 3 To 1 Step -1 ' Countdown step size
For B1 = 0 To 10 Step B0 ' Count to 10 (or so)
Serout SO,N2400,[#B1," "]
Next B1
Serout SO,N2400,[13,10] ' End of line
Pause 100 ' Delay
Next B0
Goto mainloop

End

[lerameur]

I just tried to compile some of my old working codes. Nothing is compiling...weird..

still get:

C:\PBP>pbp -p16f88 CHARG2.bas
PICBASIC PRO(TM) Compiler 2.50c, (c) 1998, 2008 microEngineering Labs, I
All Rights Reserved.
PM Assembler 4.08, Copyright (c) 1995, 2006 microEngineering Labs, Inc.
Error C:\PBP\CHARG2.ASM 3 : [235] Opcode Expected Instead of ''
Error C:\PBP\CHARG2.ASM 5 : [235] Opcode Expected Instead of ''
Error C:\PBP\CHARG2.ASM 9 : [238] Preprocessor Directive Expected
Error C:\PBP\CHARG2.ASM 9 : [235] Opcode Expected Instead of ' (( '
Error C:\PBP\CHARG2.ASM 10 : [238] Preprocessor Directive Expected
Error C:\PBP\CHARG2.ASM 10 : [235] Opcode Expected Instead of ' (( '
Error C:\PBP\CHARG2.ASM 11 : [238] Preprocessor Directive Expected
Error C:\PBP\CHARG2.ASM 11 : [235] Opcode Expected Instead of ' (( '
Error C:\PBP\CHARG2.ASM 12 : [238] Preprocessor Directive Expected
Error C:\PBP\CHARG2.ASM 12 : [235] Opcode Expected Instead of ' (( '
Error C:\PBP\CHARG2.ASM 13 : [238] Preprocessor Directive Expected
Error C:\PBP\CHARG2.ASM 13 : [235] Opcode Expected Instead of ' (( '
Error C:\PBP\CHARG2.ASM 14 : [238] Preprocessor Directive Expected
Error C:\PBP\CHARG2.ASM 14 : [235] Opcode Expected Instead of ' (( '
Error C:\PBP\CHARG2.ASM 15 : [238] Preprocessor Directive Expected
Fatal C:\PBP\CHARG2.ASM 15 : [300] Too Many Errors