Sorry Steve ... doesn't work either !!!
All Other values ...except FF !!!
Alain
Sorry Steve ... doesn't work either !!!
All Other values ...except FF !!!
Alain
Oh my gooood!!!
fill memory with FF
Programmer>>Setting
uncheck auto select memory areas and range
check EEPROM data
program your PIC... read it back... you're now in business
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
Hi, Steve
Seems impossible to write FF ( or erase ) to the EEPROM ... I had tried this way too ... memory window just can show his red face !!! no more.
I think, I have to wait for the 7.02 Release ...
Have a nice day
Alain
Hi, Everybody
Here is the answer from Microchip :
Comments:
You are correct, regarding SSR19753, even though the PIC16F84A is not mentioned. I have informed the development systems group about this.
The enhancement to erase EEPROM is planned for MPLAB IDE v7.20.
Currently:
Issuing an Erase when the device has been code protected will clear the entire device of data. A Blank Check will state the device is blank
Programming the entire device with new data will change all memory areas. If for example this data were the reset values, a Blank Check after programming would reflect the device is blank.
So must we do ...
Good quiet night to you, folks ...
Alain
Bookmarks