serial problem

Closed Thread
Results 1 to 5 of 5

Thread: serial problem

Hybrid View

  1. - 9th November 2010, 10:18 #1
    BrianT's Avatar
    BrianT
    BrianT is offline Member
    Join Date
    Oct 2006
    Posts
    316

    Did you find this post helpful? Yes | No

    Default Needs a MODE number

    The SEROUT command format is
    SEROUT pin, mode, [var1, var2...]

    You don't appear to have any MODE specified so no speed is specified.

    HTH
    BrianT
  2. - 9th November 2010, 14:01 #2
    longsigh's Avatar
    longsigh
    longsigh is offline Junior Member
    Join Date
    Nov 2010
    Posts
    2

    Did you find this post helpful? Yes | No

    Default

    THANK YOU!!!!!

    i mis-typed copying from test program into main program and was having a moment of number blindness............lol
  3. - 9th November 2010, 16:43 #3
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    However if i leave program Define's and delete program except:

    SEROUT PORTC.5, [tagnum,pcount,tcount,stat]

    it works...???...???
    That is the weird part.
    Dave
    Always wear safety glasses while programming.
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules