To be honest - mount the relay off the board - then take two wires from the coil to the PCB, then wire your mains wiring to the relay.
|
To be honest - mount the relay off the board - then take two wires from the coil to the PCB, then wire your mains wiring to the relay.
|
|
No, why ???
|
I noticed the transformer was placed at 45 degrees. Usually on audio systems was placed that way.
Ioannis
|
LOL - I wish i could say there was a technical reason for that, such as to reduce interference or for aesthetics, ..... but truth is the case has lots of pre molded standoffs and that was the only way I found two standoffs at the correct pitch to secure the transformer toOriginally Posted by Ioannis
|
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks