Easyhid don't work on my notebook (device not recognized)

[mackrackit]

For what it is worth I use a 1.0uF 25V.

[moacyr]

Thanks,

I tested one 2.2 tantalum capcitor, because I have one at home, It is too high? There is any problem when using tantalum capacitor? the usb don't work . One new informatin: I am using microchip bootload to write the program, and PIC DEM FS USB (Microchip driver) works with no problems on the note book, only when the MCU is started with HID, windows xp don't recognize the device, on the desktop every thing ok. The internal pull up resistos is good enougth, or is interesting to use external pull up to get high speed usb ?

[mackrackit]

I have not uses the PIC DEM FS USB. Sounds like it could be a driver problem though.

You could test the hardware. Putthe 470 cap back in and try the USB mouse demo that came with PBP. I know that one is cross platfom, Linux and Windows, so if it works I think it would be safe to say the problem is on the PC side.

Sorry I can not ne much help.