Fresh PicKit2 issues

[J. Mark Wolf]

I have the same combination.

Here is the command line I use (accessed by selecting edit in the comiler and programmer options dialog):

/PPIC$target-device$ /F$hex-filename$ /M -h9 /I

the /M basically tells it to totally reprogram the device including an erase at start

the -h9 causes the dos window to say open for nine seconds. 9 is the max value. You can change that to -hk and that will cause the window to not be closed until you hit a key. If you do that and don't close the window you'll get an error on next time (at least I did).

/I causes it to display device ID and silicon revision.

Thanks D, I'll try that.