oscillator selection

[PICMAN]

im using a resanator, 20 mhz,

which option do i use

lp
xt
hs
rc

[mister_e]

HS, if your crystal is higher than 4MHZ

[PICMAN]

do i need to

______
DEFINE osc 20
______


at the begining of my code,, i use microcode studio to compile, thenicprog to burn,

,

is there any other configuration lines i need,

[mister_e]

when using a different crystal than 4MHZ you need to place this include line, AND set your crystal fuse into your programmer (HS,XT,LP...)

not much