pic18f887 event timer

[cpayne]

I am not sure if I shoudl reply to this thread or the main interupt thread.

Anyways, I am getting errors when compiling. It looks like its all with the includes files.

I have attached a screenshot showing the errors and my code

Can anyone let me know what I am doing wrong?

Thanks,
Charlie

[Darrel Taylor]

The answers are in the errors. They tell you what you need to do.

[cpayne]

...perhaps the errors mean something to those who know, but I am not smart enough to know (hence the reason I am for asking for help). A little more guidance would be appreciated. am I suposed to edit pbppic14.lib, if so how and where, its a huge file. Or am I suposed to change the includes file for the PIC16F887?

Thanks,
Charlie

[Darrel Taylor]

Add ...

wsave VAR BYTE $70 SYSTEM

to your program.

[cpayne]

OK. Thanks, Compiles now and have a blinking LED. Back to the timing... Sorry I am so dense with this.

How do I go about setting the timer for prescale of 1 and a peload of 21537

I have been looking at previous posts and the datasheet for the 16f887, but not really sure what I need to do.

I assume I have to set T1CON and perhaps OPTION_REG

Also would I be better off using Timer2 since its 8bit (would it be less resources, etc?). As the timer is tripping along, there is no issue with timing of other things like serial commands, I2C timing, etc?

[mackrackit]

http://www.picbasic.co.uk/forum/show...7472#post17472
Has the example to set the pre-scaler.
Then in your code for the pre-load.

PreLoad     VAR WORD
PreLoad =  21537 
TMR1L = PreLoad.LowByte
TMR1H = PreLoad.HighByte

Then in the interrupt routine

TMR1L = PreLoad.LowByte   ' Load the timer with preload value.
TMR1H = PreLoad.HighByte

Maybe....

[cpayne]

cool. I had it in the begining, did not have it in the interupt. Firing every 22ms on the scope.

So, this will not mess up anything as far as I2C or serial? or is that dependent on what I do during the interupt? (The final interupt will take about 10-14ms and fire off every 22ms)