PIC18F2220 I2C resetting

Closed Thread
Results 1 to 5 of 5

Hybrid View

  1. - 18th October 2010, 18:26 #1
    cpayne's Avatar
    cpayne
    cpayne is offline Junior Member
    Join Date
    Aug 2005
    Location
    NC, USA
    Posts
    53

    Did you find this post helpful? Yes | No

    Default

    well, good thing I just wasted too many hours staring at the software and wasted everyone's time on the post. Went and checked the hardware for shorts and continuity. Helps if you solder the clk line to the PCB...

    Thanks for telling me its the hardware. I guess I should use my glasses when putting the boards together.
  2. - 18th October 2010, 19:00 #2
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    I guess I should use my glasses when putting the boards together.
    That sorta thing happens to me more often than I care to admit
    Sometimes I just watch for smoke...
    Dave
    Always wear safety glasses while programming.
  3. - 18th October 2010, 23:09 #3
    aratti's Avatar
    aratti
    aratti is offline Senior Member
    Join Date
    May 2008
    Location
    Italy
    Posts
    825

    Did you find this post helpful? Yes | No

    Default

    I am using 4.7k pulldowns as I usual.
    Surely a typo, you meant PULLUP!

    Cheers

    Al.
    All progress began with an idea
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules