Sounds more like a hardware problem.The chip keeps resetting everytime I try writing.
What programmer are you using?
Do you have a current schematic?
|
Sounds more like a hardware problem.The chip keeps resetting everytime I try writing.
What programmer are you using?
Do you have a current schematic?
Dave
Always wear safety glasses while programming.
|
well, good thing I just wasted too many hours staring at the software and wasted everyone's time on the post. Went and checked the hardware for shorts and continuity. Helps if you solder the clk line to the PCB...
Thanks for telling me its the hardware. I guess I should use my glasses when putting the boards together.
|
That sorta thing happens to me more often than I care to admitI guess I should use my glasses when putting the boards together.
Sometimes I just watch for smoke...
Dave
Always wear safety glasses while programming.
|
Surely a typo, you meant PULLUP!I am using 4.7k pulldowns as I usual.
Cheers
Al.
All progress began with an idea
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks