PIC18LF13K50 Extremly low power counter


Closed Thread
Results 1 to 20 of 20

Hybrid View

  1. #1
    Join Date
    Nov 2007
    Location
    West Covina, CA
    Posts
    219


    Did you find this post helpful? Yes | No

    Default Awesome!

    Cool deal! Good feeling when you get over that hurdle huh?
    I generally keep to XR7 type caps with the higher voltage (25V to 50V) rating.
    Voltage Duration: Capacitors are operated at a voltage below their rated value then the reduced stress and lower leakage current will give an improvement in the life expectancy. Since leakage current increases with temperature the benefit of a reduced operating voltage is more pronounced at higher temperatures.
    from: http://www.interfacebus.com/Engineer...acitors10.html
    Louie

  2. #2
    Join Date
    Sep 2009
    Posts
    755


    Did you find this post helpful? Yes | No

    Default

    It was not that difficult, but a nice feeling when you finish something
    The problem was that this was the first time that I work with 18LF13K50. There are some specific things about this PIC
    Now I'm trying to reduce run time on pic...
    For testing I'm using 220uF/6.3V low esr capacitor in parallel with batery, close to pic power pins, and 100nF/50V ceramic capacitor on Vusb pin.
    Thank you very much for your help

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts