Help reading schematic

Results 1 to 16 of 16

Threaded View

  1. - 1st October 2010, 21:05 #4
    aratti's Avatar
    aratti
    aratti is offline Senior Member
    Join Date
    May 2008
    Location
    Italy
    Posts
    825

    Did you find this post helpful? Yes | No

    Default

    Also on the BAT54S diodes, are these 3 pin? If so would someone have a full part number as I already have 2 pin ones.
    Any schottky diode of 500 mA 30 volts will be ok as a replacement.

    Every FDC6420C should be regarded as half bridge. It incorporate both the N & P channels mosfet.

    The circuit function is a driver for a bi-polar stepper motor with 12 volts @ 2 Amps max per winding.

    Cheers

    Al.
    Last edited by aratti; - 1st October 2010 at 21:10.
    All progress began with an idea
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules