Reading in Biphase - I thought this would be easy

Closed Thread
Results 1 to 3 of 3

Hybrid View

  1. - 28th September 2010, 08:13 #1
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    Can you try an external OSC? Maybe the internal is not stable enough?
    Dave
    Always wear safety glasses while programming.
  2. - 29th September 2010, 04:58 #2
    brid0030's Avatar
    brid0030
    brid0030 is offline Junior Member
    Join Date
    Nov 2006
    Posts
    70

    Did you find this post helpful? Yes | No

    Default um...can I delete this thread?

    So I just discovered that I was displaying data incorrectly. I should have been using REV 8 to flip each byte around so the entire bit sequence would be ordered correct. I did this and found that most of my "failed" strategies to read in biphase actually work fine. I'm still not sure about the bounce apparent above, but it is not actually that big a problem. I'll post some working code so that this thread is not a complete waste of cyberspace. Sorry to all who read and were confused.
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules