RS232 switch, and thank you Mister E

Closed Thread
Results 1 to 3 of 3

Hybrid View

  1. - 3rd March 2005, 01:04 #1
    Demon's Avatar
    Demon
    Demon is online now SuperMod
    Join Date
    Jan 2005
    Location
    Montreal, Quebec, Canada
    Posts
    3,172

    Did you find this post helpful? Yes | No

    Default

    For those like me that knew nothing about relay switches, this is what Mister E showed me:

    http://www.jameco.com/webapp/wcs/sto...oductId=123118

    Mine are very similar, except for pinout. Don't assume all pinouts are the same, they are not. My common leads are the 1st set after the power pins, not in the middle of the other pair. With just my luck, there are no datasheets on the web for my particular model, not even on the manufacturer's site.

    The +5V pin will have a bump or some sort of identification like on MCUs.

    Robert
    My Creality Ender 3 S1 Plus is a giant paperweight that can't even be used as a boat anchor, cause I'd be fined for polluting our waterways with electronic devices.

    Not as dumb as yesterday, but stupider than tomorrow!
  2. - 3rd March 2005, 01:06 #2
    Demon's Avatar
    Demon
    Demon is online now SuperMod
    Join Date
    Jan 2005
    Location
    Montreal, Quebec, Canada
    Posts
    3,172

    Did you find this post helpful? Yes | No

    Red face

    Dyslexic keyboard.

    That is supposed to say DPDT SWITCH on the pic.

    Robert
    My Creality Ender 3 S1 Plus is a giant paperweight that can't even be used as a boat anchor, cause I'd be fined for polluting our waterways with electronic devices.

    Not as dumb as yesterday, but stupider than tomorrow!
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules