|
BrianT, I have not had any problems with MCLoader w/ the IOGEAR USB to RS-232 converters and use them all the time here at work.. I have also used the FTDI USB to TTL converter cables in some designs to get away from using an RS-232 level convertor. They also work GREAT with MCLoader...
Dave Purola,
N8NTA
|
Hi,
Not much help, I know but I'm using a FTDI TTL-232-5V cable without trouble. I also have a SureElectronics PIC-board which sports a CP2102 USB<->Serial chip, a ATEN UC-232 USB dongle as well a cheap one I got on EBAY and they all seem to work fine with MCLoader.
/Henrik.
|
I do not know how related is my reply, but is worth I think to mention.
Pickit3 has memory inside that can store a hex code and then program the connected with ICSP lines controller by just pressing the button. It does not need a PC connected, just a power supply.
Ioannis
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks