Help with pic 12f629

Closed Thread
Results 1 to 40 of 53

Hybrid View

  1. - 16th September 2010, 19:11 #1
    cncmachineguy's Avatar
    cncmachineguy
    cncmachineguy is offline Senior Member
    Join Date
    Aug 2010
    Location
    Maryland, USA
    Posts
    869

    Did you find this post helpful? Yes | No

    Default

    now to show off my newbieness. If that is the entire program, won't he need SOME sort of init type stuff? setup tris,osc,...? something?
    -Bert

    The glass is not half full or half empty, Its twice as big as needed for the job!

    http://foamcasualty.com/ - Warbird R/C scratch building with foam!
  2. - 16th September 2010, 19:26 #2
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    TRIS is taken care of in the HIGH/LOW commands.
    The vars will need defined. The OP had that.
    DEFINE the OSC and set the configs someplace. Figured the OP had those too. Seemed the code was running, just not running as expected.
    Dave
    Always wear safety glasses while programming.
  3. - 16th September 2010, 19:34 #3
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    DOH!!
    That chip has an ADC I think.
    Add
    ANSEL=%00000000

    http://www.picbasic.co.uk/forum/showthread.php?t=561
    Dave
    Always wear safety glasses while programming.
  4. - 16th September 2010, 19:34 #4
    cncmachineguy's Avatar
    cncmachineguy
    cncmachineguy is offline Senior Member
    Join Date
    Aug 2010
    Location
    Maryland, USA
    Posts
    869

    Did you find this post helpful? Yes | No

    Default

    Is If_then a goto or gosub? I am used to it being a goto unless gosub is called out. But I clearly haven't read my PBP book yet. - sorry

    If goto then return will break the code - yes?
    -Bert

    The glass is not half full or half empty, Its twice as big as needed for the job!

    http://foamcasualty.com/ - Warbird R/C scratch building with foam!
  5. - 16th September 2010, 19:41 #5
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    Bert,
    You are correct. Thanks for catching that.
    Dave
    Always wear safety glasses while programming.
  6. - 16th September 2010, 19:47 #6
    cncmachineguy's Avatar
    cncmachineguy
    cncmachineguy is offline Senior Member
    Join Date
    Aug 2010
    Location
    Maryland, USA
    Posts
    869

    Did you find this post helpful? Yes | No

    Default

    so please confirm:

    test should have "goto check" instead of "return"?
    -Bert

    The glass is not half full or half empty, Its twice as big as needed for the job!

    http://foamcasualty.com/ - Warbird R/C scratch building with foam!
  7. - 16th September 2010, 20:01 #7
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    Yes

    that pretty much does it for me today. Too many DOHS.
    Dave
    Always wear safety glasses while programming.
  8. - 16th September 2010, 20:41 #8
    cncmachineguy's Avatar
    cncmachineguy
    cncmachineguy is offline Senior Member
    Join Date
    Aug 2010
    Location
    Maryland, USA
    Posts
    869

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by mackrackit View Post
    Yes

    that pretty much does it for me today. Too many DOHS.
    you intended to right?

    I thought you were just giving us new folks a chance to help Better to teach than to do. that way we learn something.
    -Bert

    The glass is not half full or half empty, Its twice as big as needed for the job!

    http://foamcasualty.com/ - Warbird R/C scratch building with foam!
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules