Hi Dave,
You haven't called it a clock:
Code:
@ printstr2 25,20, "SSD2119 Controller"
@ printstr2 25,28, "Dave Cutliff "
@ printstr2 25,36, "TFT Color LCD Model Rev 1.0"
@ printstr2 25,44, "320xRGBx240"
@ printstr2 25,60, "PicBasic Pro6.0 "
@ printstr2 25,68, "Sept 8,2010"
It looks like a general demo how to talk to the LCD,
and SD Card, etc. (Quite a head start)
nor do I see any clock code or line draw routines
but I do see circles and straight lines for rectangles.
I assumed you ran into the same problem with integer math,
because normally the diagonal lines come first, then other 2D routines.