Making Program Code Space your playground...

[mister_e]

if i can suggest one thing, use the internal EEPROM of your PIC if he have one. Really easy to do with DATA to load your value, later use READ to read your aray from the internal EEPROM.

Can you start another thread and post your whole code? That way we will be able to point you some idea.

[Homerclese]

Hi,

Yes I was using EEPROM for array storage but the 16f877 has only 256 bytes available. I will need about 4k just for pattern storage. That is why I'm looking at using the code program space. The problem seems to be my use of binary data input. Here's the code i'm using for testing.


' PCode.bas
' Quick Demo Program
' showing how you can play with
' Program Code Space

Define debug_pacing 1000 'serial setup
Define debug_reg porta
Define debug_bit 0
Define debug_baud 2400
Define debug_mode 1
TRISB= %00000000
TRISa= %00000 '
'

' RAM Assignments & Variables
' ---------------------------
PCAddress var WORD ' Used to determine ADDRESS of Data
' within Program Code space
PCData var BYTE ' Data Variable - in this example a BYTE
' but could be a WORD as each memory
' address is capable of storing 14-bits
PCWord var WORD
'
' Start Program
' =============
Pause 2000
DoitAgain:
PCAddress=7190 ' Pointer to start of Data area
'
' Read & Display till we get a stop character
' -------------------------------------------
ReadCodeLoop:
READCODE PCAddress,PCData ' Sequentially read bytes
If PCData>0 then ' Until a Stop character is found

debug "ADD=", dec pcaddress 'lcd display
debug 254,192
debug "DAT=", dec pcdata

PCAddress=PCAddress+1 ' Remembering to increment our address
portB=pcdata 'output data to portB LEDs

Pause 300
Goto ReadCodeLoop
endif
Pause 50

Goto DoitAgain

End


Asm
CODE 7190



DB 00000001
DB 00000010
DB 00000100
DB 00001000
DB 00010000
DB 00100000
DB 01000000
DB 10000000
DB 0

Endasm




........................
RESULTS

debug LCD readout values
00000001 = 1 OK
00000010 = 10 NG
00000100 = 100 NG
00001000 = 232 NG
00010000 = 16 OK
00100000 = 160 NG
01000000 = 64 OK
10000000 = 128 OK

[El_AMPo]

The first method shown work only on 16F87X flash memory PICs as far as i know.

The second method posted that used PEEKCODE and POKECODE works great in smaller pics.

...for the ones that didn'd get it in the first example

--[To Write]--
Just include after the END tag of the program:

POKECODE @[start address],[byte0],[byte1],[byte2]....(up to 79)

(note: start address must be bigger than your program size, and the command only works when programming the pic)

--[To Read]--

(use something like...)

OUT var byte
y var word

For y = [start address] to [start address + nºbytes]
PEEKCODE y, OUT
Next y


hope it helps...

[flotulopex]

How do I determine the free memory space?

PBP manual: The listing file may be examined to determine program addresses.

I've appended a test list file (original .LST file, renamed .TXT for uploading) generated by MCS.

How must I read & understand this file?

PIC16F690's Memory Map looks like this:
<img src="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=2728&stc=1&d=121534385 0">

[Acetronics2]

Hi, Roger

MPLAB, Program window ... does it sound something to You ???

... Lol

With MCS, have a look to the SMALL characters at the bottom left part of your screen ...

...

Alain

[flotulopex]

Bonjour Alain,

Sorry, I'm still an amateur and I don't use MPLAB...

Are you meaning I just have to add the amount of words in MCS to the memory starting adress?

It can't be that simple?!

[Acetronics2]

Hi, Roger

Not so simple ...

say it is a 16F628 with 2k memory ( 2048 words )

2048 minus the "little number" is the first memory adress you can use for placing tables ... ( remember the default DEC radix for PbP !!! )

to be sure ... you can let some "blank lines" ... before the Table. Or begin your table on a "round" adress ... 2FF, or 1200 i.e. ( Remember A good programmer NEVER adds mods to his programs !!! ... LoL ...)


Alain