Stack Overflow - Stack Underflow

**massive attack** · - 1st September 2010, 11:18

Code:

'===============================================================================
@ device  INTRC_OSC_NOCLKOUT
@ device  wdt_off
@ device  pwrt_on
@ device  protect_off
include "Tanimlar.inc"
'===============================================================================
Ana:
   gosub Chk_KEYPAD
   if say = 3 then 
        gosub kilit
   endif
   pause 1
goto Ana
'===============================================================================
Chk_KEYPAD:
   for row = 0 to 3 
      PORTB = (dcd row) ^ $f    
      pause 1
      col = PORTB >> 4
      if (col <> $f) then       'tuşa basıldı 
         key = (row * 3) + (ncd (col ^ $f))
         low buz 
         pause 70
         high buz
         while (PORTB >> 4) <> $f  
            pause 1
         wend
         if key = 11 then key = 0
         TusBuff[tussay] = key
         if psw.0 = 0 then
             gosub Chk_tussay
         else
             gosub chk_tussay2
         endif
         key = 255
      endif
   next 
return    
'===============================================================================
Beep:
   high ld1
   low buz 
   pause 70
   high buz 
   pause 70
   low buz
   pause 70
   low ld1
   high buz
return
'===============================================================================
Chk_SfrOK: 
   psw.1 = 0
   psw.2 = 0 
   psw.3 = 0
   psw.4 = 0 
   psw.5 = 0
   psw.6 = 0 
   if (TusBuff[0] = SfrBuff[0]) and (TusBuff[1] = SfrBuff[1]) and (TusBuff[2] = SfrBuff[2]) and (TusBuff[3] = SfrBuff[3]) then psw.1 = 1 
   if (TusBuff[0] = SfrBuff[4]) and (TusBuff[1] = SfrBuff[5]) and (TusBuff[2] = SfrBuff[6]) and (TusBuff[3] = SfrBuff[7]) then psw.2 = 1
   if (TusBuff[0] = SfrBuff[8]) and (TusBuff[1] = SfrBuff[9]) and (TusBuff[2] = SfrBuff[10]) and (TusBuff[3] = SfrBuff[11]) then psw.3 = 1
   if (TusBuff[0] = SfrBuff[12]) and (TusBuff[1] = SfrBuff[13]) and (TusBuff[2] = SfrBuff[14]) and (TusBuff[3] = SfrBuff[15]) then psw.4 = 1
   if (TusBuff[0] = SfrBuff[16]) and (TusBuff[1] = SfrBuff[17]) and (TusBuff[2] = SfrBuff[18]) and (TusBuff[3] = SfrBuff[19]) then psw.5 = 1
   if (TusBuff[0] = MKSfrBuff[0]) and (TusBuff[1] = MKSfrBuff[1]) and (TusBuff[2] = MKSfrBuff[2]) and (TusBuff[3] = MKSfrBuff[3]) then psw.6 = 1
   if psw.1 = 0 and psw.2 = 0 and psw.3 = 0 and psw.4 = 0 and psw.5 = 0 and psw.6 = 0 then
        if TusBuff[tussay] = 12 or TusBuff[tussay] = 10 then           
            if psw.6 = 0 then
                gosub Hata
            endif
        endif
   endif
return   
'===============================================================================
Chk_NewSfrOK:
   psw.1 = 0
   psw.2 = 0
   psw.3 = 0
   psw.4 = 0
   psw.5 = 0
   psw.6 = 0
   if (TusBuff[5] = TusBuff[10]) and (TusBuff[6] = TusBuff[11]) and (TusBuff[7] = TusBuff[12]) and (TusBuff[8] = TusBuff[13]) then 
        psw.1 = 1
        psw.6 = 1
   endif
return 
'===============================================================================
Sifre_Degis:   
    if psw.1 then 
       SfrBuff[0] =  TusBuff[5]
       SfrBuff[1] =  TusBuff[6]
       SfrBuff[2] =  TusBuff[7]
       SfrBuff[3] =  TusBuff[8]
    endif
    if psw.2 then
       SfrBuff[4] =  TusBuff[5]
       SfrBuff[5] =  TusBuff[6]
       SfrBuff[6] =  TusBuff[7]
       SfrBuff[7] =  TusBuff[8]
    endif
    if psw.3 then
       SfrBuff[8] =  TusBuff[5]
       SfrBuff[9] =  TusBuff[6]
       SfrBuff[10] =  TusBuff[7]
       SfrBuff[11] =  TusBuff[8]
    endif
    if psw.4 then
       SfrBuff[12] =  TusBuff[5]
       SfrBuff[13] =  TusBuff[6]
       SfrBuff[14] =  TusBuff[7]
       SfrBuff[15] =  TusBuff[8]
    endif
    if psw.5 then
       SfrBuff[16] =  TusBuff[5]
       SfrBuff[17] =  TusBuff[6]
       SfrBuff[18] =  TusBuff[7]
       SfrBuff[19] =  TusBuff[8]
    endif
    
   Write 0, SfrBuff[0]       'Yeni şifre EEprom'un 0..3 adreslerine kaydedildi
   Write 1, SfrBuff[1]
   Write 2, SfrBuff[2]
   Write 3, SfrBuff[3]
   Write 4, SfrBuff[4]       'Yeni şifre EEprom'un 0..3 adreslerine kaydedildi
   Write 5, SfrBuff[5]
   Write 6, SfrBuff[6]
   Write 7, SfrBuff[7]
   Write 8, SfrBuff[8]       'Yeni şifre EEprom'un 0..3 adreslerine kaydedildi
   Write 9, SfrBuff[9]
   Write 10, SfrBuff[10]
   Write 11, SfrBuff[11]
   Write 12, SfrBuff[12]       'Yeni şifre EEprom'un 0..3 adreslerine kaydedildi
   Write 13, SfrBuff[13]
   Write 14, SfrBuff[14]
   Write 15, SfrBuff[15]
   Write 16, SfrBuff[16]       'Yeni şifre EEprom'un 0..3 adreslerine kaydedildi
   Write 17, SfrBuff[17]
   Write 18, SfrBuff[18]
   Write 19, SfrBuff[19]
return
'===============================================================================
Chk_tussay: 
   select case tussay
      case 4
         gosub Chk_SfrOK       
         if psw.1 or psw.2 or psw.3 or psw.4 or psw.5 or psw.6 then 
            if TusBuff[tussay] = 12 then Kilit_acik
            if TusBuff[tussay] <> 10 then Clr_TusBuff
            gosub Beep
         else
            gosub Clr_TusBuff
         endif
      case 9
         if TusBuff[tussay] <> 12 then Clr_TusBuff
         gosub Beep 
      case 14
         if psw.6 = 0 then
             if TusBuff[tussay] <> 12 then Clr_TusBuff
             gosub Beep
             gosub Chk_NewSfrOK   
             if psw.1 or psw.6 then 
                gosub Beep
                gosub Sifre_Degis
                gosub Beep
                gosub Clr_TusBuff
             else
                gosub Clr_TusBuff
             endif 
         endif
      case 16
         if TusBuff[tussay] <> 12 then clr_TusBuff
         gosub beep
         gosub Chk_NewSfrOK   
         if psw.6 then 
            gosub Beep
            gosub Sifre_Degis
            gosub Beep
            gosub Clr_TusBuff
         else
            gosub Clr_TusBuff
         endif    
      case else
         if TusBuff[tussay] = 12 then Clr_TusBuff
   end select
   tussay = tussay + 1   
return
'===============================================================================
Chk_tussay2: 
   select case tussay
      case 4
         if psw.6 then 
            psw.0 = 0
            if TusBuff[tussay] = 12 then Kilit_acik
            if TusBuff[tussay] <> 10 then Clr_TusBuff
            gosub Beep
         else
            gosub Clr_TusBuff
         endif
      case 9
         if TusBuff[tussay] <> 12 then Clr_TusBuff
         gosub Beep 
      case 14
         if TusBuff[tussay] <> 12 then Clr_TusBuff
         gosub Beep
         gosub Chk_NewSfrOK   
         if psw.6 then 
            gosub Beep
            gosub Sifre_Degis
            psw.0 = 0
            gosub Beep
            gosub Clr_TusBuff
         else
            gosub Clr_TusBuff
         endif    
      case else
         if TusBuff[tussay] = 12 then Clr_TusBuff
   end select
   tussay = tussay + 1    
return
'===============================================================================
Reset:
    for cnt = 0 to 14 
        TusBuff[cnt] = cnt 
    next
    low ld1
    high buz
    tussay = 0 
    psw.0 = 0
    psw.1 = 0
    psw.6 = 0
    say = 0
    return   
'===============================================================================
Hata:
    say = say + 1
    high ld1
    low buz
    pause 200
    low ld1
    high buz
    return
'===============================================================================
Kilit_acik:
   if psw.0 = 0 then 
   say = 0
   high mtr             ' motoru çalıştır
   High frw             ' İleri dön
   pause Frw_time       ' ileri dönme süresi
   low frw              
   low mtr
   pause wait_time      ' bekleme süresi 
   high mtr             ' motoru çalıştır
   high BCK             ' geriye dön
   pause bck_time       ' geriye dönme süresi
   low BCK 
   low mtr
   endif                                        
   gosub Reset
   return
'===============================================================================
Clr_TusBuff:
   for cnt = 0 to 14 
      TusBuff[cnt] = cnt 
   next
   tussay = 0 
   gosub Ana
'===============================================================================
Kilit :
    psw.0 = 1 
    low buz
    high ld1
    gosub chk_KEYPAD    
    gosub Kilit
end 
'===============================================================================

when simulating in proteus, errors occur:
Stack overflow executing CALL instruction;
the device is PIC16F628A
What's wrong?

**Dave** · - 1st September 2010, 11:44

massive attack , Where is the return and what are you trying to do here?

Kilit :
psw.0 = 1
low buz
high ld1
gosub chk_KEYPAD
gosub Kilit
end

This type of syntax will surely overflow the stack....

Dave Purola,
N8NTA

**massive attack** · - 1st September 2010, 13:30

Thank you for answer Dave,

i am trying to do a keypad controlled lock.

First i used the device pic16f84a and its memory is not enough to more password. Than i decided to use pic16f628a, the memory problem was solved. Although i used almost the same code in both microcontroller, now i have this type of problem.

**mackrackit** · - 1st September 2010, 13:33

What is in the include file?

**massive attack** · - 1st September 2010, 13:39

definitions

Code:

BCK_Time con 150 * 3        ' Motorun geri dönüş süresi
Wait_Time con 500 *3        ' Kilidin açık durumda bekleme süresi
FRW_Time con 155 * 3        ' Motorun ileri dönüş süresi
OPTION_REG.7 = 0            ' PORTB Pull-up aktif.
TrisA = 0                   ' PORTA'nın bütün uçları çıkış
PortA = %00010000           ' Buzzer'ı sustur.
TrisB = %11110000           ' PORTB'nin 0-3 uçları çıkış, 4-7 uçları giriş  
PortB = 0        
FRW var PortA.3
MTR var PortA.1 
LD1 var PortA.2
BCK var PortA.0
BUZ var PortA.4
cnt var byte
psw var byte
say var byte
key var byte
col var byte
row var byte
tussay var byte
TusBuff var byte[16]
SfrBuff var byte[24]
MKSfrBuff var byte[4]
EEPROM 0,[0,0,0,0]          'Başlangıç şifresi 1,1,1,1 EEprom'un 0..3 
                            'adreslerine yazıldı
EEPROM 4,[1,1,1,1]          'Başlangıç şifresi 1,1,1,1 EEprom'un 0..3 
                            'adreslerine yazıldı
EEPROM 8,[2,2,2,2]          'Başlangıç şifresi 1,1,1,1 EEprom'un 0..3 
                            'adreslerine yazıldı
EEPROM 12,[3,3,3,3]         'Başlangıç şifresi 1,1,1,1 EEprom'un 0..3 
                            'adreslerine yazıldı
EEPROM 16,[4,4,4,4]         'Başlangıç şifresi 1,1,1,1 EEprom'un 0..3 
                            'adreslerine yazıldı
eeprom 20,[5,5,5,5]         'Master Key şifresi 9,8,7,6,5 EEprom'un 4..8 
                            'adreslerine yazıldı
Read 0, SfrBuff[0]           'EEprom'un 0..3 adreslerinden şifreyi SfrBuff'a 
Read 1, SfrBuff[1]           'kopyala
Read 2, SfrBuff[2]
Read 3, SfrBuff[3]
Read 4, SfrBuff[4]           'EEprom'un 0..3 adreslerinden şifreyi SfrBuff'a 
Read 5, SfrBuff[5]           'kopyala
Read 6, SfrBuff[6]
Read 7, SfrBuff[7]
Read 8, SfrBuff[8]           'EEprom'un 0..3 adreslerinden şifreyi SfrBuff'a 
Read 9, SfrBuff[9]           'kopyala
Read 10, SfrBuff[10]
Read 11, SfrBuff[11]
Read 12, SfrBuff[12]          'EEprom'un 0..3 adreslerinden şifreyi SfrBuff'a 
Read 13, SfrBuff[13]          'kopyala
Read 14, SfrBuff[14]
Read 15, SfrBuff[15]
Read 16, SfrBuff[16]          'EEprom'un 0..3 adreslerinden şifreyi SfrBuff'a 
Read 17, SfrBuff[17]          'kopyala
Read 18, SfrBuff[18]
Read 19, SfrBuff[19]
read 20, MKSfrBuff[0]        'EEprom'un 4..8 adreslerinden Master Key'i 
read 21, MKSfrBuff[1]        'MKSfrBuff'a kopyala
read 22, MKSfrBuff[2]
read 23, MKSfrBuff[3]
tussay = 0                  'Tuşa basılma sayısı
say = 0                     'Yanlış şifrelerin sayısını saklar "3'e kadar."
psw = 0

Thread: Stack Overflow - Stack Underflow

Thread Tools

Search Thread

Display

Stack Overflow - Stack Underflow

Members who have read this thread : 0

Bookmarks

Bookmarks

Posting Permissions