|
Paul,
I will play with this when I get home tonight, Actually have to WORK at work today.
As for the ADC part, I see it as this:
new tab or button to bring up that function. same as port state is now.
choose how many channels and which one(s). That will also drive whether I/O is avail for that pin
Choose Vref options.
Choose 8 or 10 bit and right or left justified.
Stuff I forgot
set registers to corespond to choices
Last edited by cncmachineguy; - 15th September 2010 at 15:56. Reason: typos
-Bert
The glass is not half full or half empty, Its twice as big as needed for the job!
http://foamcasualty.com/ - Warbird R/C scratch building with foam!
|
I always get my best work done when I'm supposed to be doing something else.Originally Posted by cncmachineguy
I will play with this when I get home tonight, Actually have to WORK at work today
Yeah, it's that next-to-the-last one that's tough to implement...see the attached screenshot.As for the ADC part, I see it as this:
new tab or button to bring up that function. same as port state is now.
choose how many channels and which one(s). That will also drive whether I/O is avail for that pin
Choose Vref options.
Choose 8 or 10 bit and right or left justified.
Stuff I forgot
set registers to corespond to choices
Sorry, couldn't resist the joke...8^)
Best Regards,
Paul
|
ROTFLMAO!!!!!!!!! I love it. I vote leave it in, then see how many users scratch their head.
If you can get that to work, it will be a "true" wizard!!
-Bert
The glass is not half full or half empty, Its twice as big as needed for the job!
http://foamcasualty.com/ - Warbird R/C scratch building with foam!
|
Still laughing.
Ok, more serious thought. Maybe give an option to set a variable name for the results?
Guess I will have to pull up a data sheet to see what I forgot.
-Bert
The glass is not half full or half empty, Its twice as big as needed for the job!
http://foamcasualty.com/ - Warbird R/C scratch building with foam!
|
I am struggling with Interrupt on Change this afternoon and cannot figure whats wrong ...
Now this would be the ultimate wizard.
Prepare the settings for the DT-INTs too!
Ioannis
|
This would be a great addition, provided DT is good with it.
-Bert
The glass is not half full or half empty, Its twice as big as needed for the job!
http://foamcasualty.com/ - Warbird R/C scratch building with foam!
|
Absolutely, sounds like a great idea!
Go for it.
DT
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks