Hello All,
I was hoping to have an demo exe ready to post today, but the development had to take a major turn this past Friday...
I removed all the fuse configuration parsing and settings. For want of a better first task I tried adding the setup of the pin input/output states and levels. The relevant MAPSM .inc file is parsed to determine what ports exist and which individual bits are available for those ports (and of course GPIO for the little chips). Each port gets it's own tab. Bits that don't exist for a given port are not shown on the individual tab. (Did that make *any* sense?). The configuration files can be saved and re-loaded.
However, when taking the last look before posting I noticed two bugs that I won't have a chance to fix until tonight or tomorrow. One is that the text doesn't update properly when using certain chips until you actually click on a tab. The other is that when the text is generated in the form "TRISA = %10101010" I have inadvertently reversed the order of the bits. (When all bits in a port are not used it instead puts in an individual line for each bit, e.g. "TRISA.1 = %0".) I'm sure additional bugs will appear...
Anyway I just wanted to put out that I was still trying to (finally!) maybe do something useful for this community. Suggestions for additional features to add would be most welcome. A screenshot is attached.
Best Regards,
Paul
Bookmarks