%
Hello cncmachineguy,
Here are a couple of ideas I have given thought to:
1. Make "Include" files for the chips you use regularly.
2. make start up files for each chip and name them accordingly, use lots of comments on the register settings so you do not have to bury yourself in them each time. Then after opening them, save them as your new project name, something like Blinky16F690.bas. Lots of us make new File directories for each project, so this naming convention works if you recompile for a different chip, say Blinky16F648A.bas, then all your hex files will be named that way too.
BTW
I program and run a Fadal TRM when I work, great to see another cnc guy here.
%