Changes and additions to Build 3:
  • -Now requires accurate location of PBP folder. This is used when populating the "Select PIC" combo box. The include file must exist in both the MPASM and PBP folders to be added. This prevents the application from attempting to parse files for microcontrollers that are not supported by PBP.
Great idea, but now I'm broke from testing at work again.

  • When selecting PIC, tabs are updated to show or hide PORT, ADC, Comparator, and USART tabs depending on whether or not they exist for that device.
  • In General tab, added DEFINE for oscillator speed.
  • In General tab, added DEFINE for using bootloader.
  • In General tab, added DEFINE for enabling PORTB pullups.
  • In Port tab, straightened out reversing of TRIS and PORT bits.
  • In Port tab, added handling so that PORT and TRIS will be output in a single line each if possible. Unused (i.e. non-existant) bits are set as zero.
  • In ADC tab, added checkbox to set all potential ADC ports to digital.
  • In ADC tab, added checkbox to configure internal ADC. At this point ONLY the standard PBP DEFINES are included.
  • In Comparator tab, added checkbox to set all potential comparator ports to digital.

Comments, bug reports, suggestions always appreciated...

Best Regards,
Paul
All sounds really good, just have to wait till I get home to play. And I have work I must do before going home.