Help on PIC16F767

[Rony]

Finally i found it,

"gadelhas" remark lets me think about the configuration ... thank you

there is a check box called "FCMEM" in the WinPIC800 programmer, when turning it OFF, it works, and all the rest will not affect this problem.

anyone knows what is this "FCMEM" that it must be off ??

thank you for all.
Rony

[gadelhas]

Well Done!.....

[Rony]

i searched for the FCMEM, it is described as follows :

FCMEN: Fail-Safe Clock Monitor Enable bit
1 = Fail-Safe Clock Monitor enabled
0 = Fail-Safe Clock Monitor disabled

Now everything is clear

Regards
Rony